Philips HTS5700R - Manual (Page 57)

E
n
g
li
sh
35
Recording
(continued)
Timer recording (S
HOW
V
IEW
®
System)
This is a simple programming system for
DVD recorders. To use it, enter the
S
HOW
V
IEW
® programming number
associated with your television
programme. You can find this number in
your TV listings magazine.
All the information needed by the DVD
recorder for programming is contained in
the programming number.
A Turn on the TV power. Select the
correct Video In channel at the TV.
B Press TIMER on the remote control.
 The timer schedule list appears.
1
2
3
4
5
6
Source RecMode Date Start End
Timer Schedule
VPS
C Press OK to confirm.
Or, press  key to go to the next
available empty slot and press OK.
 The S
HOW
V
IEW
® System menu
appears.
ShowView System
OK
Cancel Confirm
5
Enter the ShowView programming
number for the show you wish to
record. Press [RETURN] to return
to timer schedule or [TIMER] to
exit timer.
D Use the numeric keypad 0-9 to enter
the S
HOW
V
IEW
® programming number for
the show you wish to record.
(e.g. : 5-312-4 or 5,312 4, key in ‘53124’).

To clear the S
HOW
V
IEW
® programming
number, press CLEAR on the remote
control.

To cancel the S
HOW
V
IEW
® programming,
use  keys to select
CANCEL
in the
menu and press OK.
E To confirm your entry, select
CONFIRM
in
the menu and press OK.
 The system will store the timer entry
and return to the timer editor menu.

If the channel number of the TV channel
has not been assigned to the
programming number, you will have to
manually key in the channel number that
is assigned to the S
HOW
V
IEW
® code.
Follow the instructions on the TV.
F Press TIMER to exit the menu.
G Insert a DVD+R/+RW into the DVD
recorder.
H Press STANDBY-ON to turn off the
DVD recorder.
 If the DVD recorder is not in standby
mode, a warning message will appear
three minutes before the recording
starts.
 If you ignore the warning message,
the DVD recorder will automatically
switch to standby mode to prepare for
timer recording at the designated time.
 The ‘
TIMER
’ icon will light up on the
display panel if a timer recording is set.
TIPS: Ensure that there is sufficient space available on the DVD+R/+RW before recording.
You have to finalise the DVD+R before it can be played on other players, see page 39.
1_dvdr3355_eu_eng_15891.indd 35 2005-04-27 2:36:40 PM