Philips HTS5700R - Manual (Page 17)

English
17
8239 300 38591
Volume control
● Adjust VOLUME control (or press
VOL +/- on the remote) to increase
or decrease the volume level.
➜ "
VOL MIN" is the minimum volume
level and “
VOL MAX” is the maximum
volume level.
For Philips TVs only
● Press TV VOL +/- on the remote
control to adjust the TV’s volume level.
To listen through the headphones
● Plug the headphones to the PHONE
socket at the front of the AV receiver.
➜ The speakers will be muted.
➜ The current surround sound will
change to stereo mode.
To turn off the volume temporarily
● Press MUTE on the remote.
➜ Playback will continue without sound
and "
MUTE
" icon appears.
➜ To restore the volume, press MUTE
again or increase the volume level.
Night Mode - turning on/off
When activated the night mode, the high
volume outputs will be softened and low
volume outputs will be brought upward
to an audible level. It is useful for
watching your favourite action movie
without disturbing others at night.
IMPORTANT!
This feature is only available for
movies with Dolby Digital mode.
● Press NIGHT on the remote repeatedly
to switch the Night mode on or off
(default setting - OFF).
Helpful Hint:
– The night mode option is not available in
DISC 6CH mode.
Dimming system’s display
screen
● In any active mode, press DIM on the
remote to select desired brightness :
HIGH (default setting), MID or LOW.
Setting the Sleep Timer
The sleep timer enables the system to
switch to standby mode automatically at a
preset time.
● Press SLEEP on the remote repeatedly
until it reaches the desired preset turn-off
time.
➜ The selections are as follows (time in
minutes):
15 ™ 30 ™ 45 ™ 60 ™ 90 ™ 120
™ OFF ™ 15 …
➜ “
SLEEP
” icon will be shown o n the
display, except if "
OFF" is selected.
NIGHT
SLEEP
MUTE
PRESET
PROGRAM
To check or change the setting
● Press SLEEP once to show the
remaining time before switching off.
If you continue pressing the SLEEP
button, the next Sleep Timer option will
appear.
To cancel the sleep timer
● Press SLEEP repeatedly until "
OFF"
appears or press the STANDBY ON
button.
Volume Controls and Other Features