Panasonic BT-LH80WP - Manual (Page 17)

17
Main Menu
(continued)
MARKER
The underlined values are factory preset setting values.
Sub menu Settings Explanation
MARKER OFF∗ 1
ON
Used to make MARKER settings effective.
16:9∗ 2
∗
3 OFF
4:3
13:9
14:9
CNSCO
VISTA
95%
93%
90%
88%
80% Used to select/display the type of marker when the aspect ratio setting
is 16:9.
<OFF> Marker not displayed.
<4:3> 4:3 marker <13:9> 13:9 marker
<14:9> 14:9 marker <CNSCO> CNSCO marker
<VISTA> VISTA marker <95%> 95% Area marker
<93%> 93% Area marker <90%> 90% Area marker
<88%> 88% Area marker <80%> 80% Area marker
4:3∗ 2 OFF
95%
93%
90%
88%
80% Used to select/display the type of 4:3 marker.
<OFF> Marker not displayed.
<95%> 95% Area marker <93%> 93% Area marker
<90%> 90% Area marker <88%> 88% Area marker
<80%> 80% Area marker
BACK∗ 2 NORMAL
HALF
BLACK Used to select the background brightness excluding the marker.
<NORMAL> Normal background
<HALF> Background brightness 50%
<BLACK> Background brightness 0% (Black)
CENTER∗ 2 OFF
ON Used to display the center marker.
<OFF> Not displayed
<ON> Displayed
GPI PRESET1∗ 4 4:3
13:9
14:9
CNSCO
VISTA
95% (16:9)
93% (16:9)
90% (16:9)
88% (16:9)
80% (16:9)
95% (4:3)
93% (4:3)
90% (4:3)
88% (4:3)
80% (4:3) GPI PRESET1: Used to select the marker to be displayed using the
GPI terminal “MARKER1 ON/OFF” operation (→ page 31).
GPI PRESET2: Used to select the marker to be displayed using the
GPI terminal “MARKER2 ON/OFF” operation (→ page 31).
<4:3> 4:3 marker
<13:9> 13:9 marker
<14:9> 14:9 marker
<CNSCO> CNSCO marker
<VISTA> VISTA marker
<95% (16:9)> 95% Area marker when the aspect ratio is 16:9.
<93% (16:9)> 93% Area marker when the aspect ratio is 16:9.
<90% (16:9)> 90% Area marker when the aspect ratio is 16:9.
<88% (16:9)> 88% Area marker when the aspect ratio is 16:9.
<80% (16:9)> 80% Area marker when the aspect ratio is 16:9.
<95% (4:3)> 95% Area marker when the aspect ratio is 4:3.
<93% (4:3)> 93% Area marker when the aspect ratio is 4:3.
<90% (4:3)> 90% Area marker when the aspect ratio is 4:3.
<88% (4:3)> 88% Area marker when the aspect ratio is 4:3.
<80% (4:3)> 80% Area marker when the aspect ratio is 4:3.
GPI PRESET2∗ 4
• The marker is not displayed during VF line operation.
• The marker display size is the display size of a camera-recorder, and so is smaller than the previous model (BT-
LH900A).
∗1 The setting becomes “ON” when the unit receives marker-related control during REMOTE operation. (Priority
goes to GPI when GPI settings exist.)
∗2 When controlling the marker settings using the GPI function (→ page 31), these settings become disabled.
∗3 These are only enabled when the HD signal and SD signal aspect ratio settings are 16:9.
∗4 When the HD signal and SD signal aspect ratio setting is 16:9, a 4:3 marker is displayed in the center 4:3
area.