Panasonic BT-LH80WP - Manual (Page 27)

27
Main Menu
(continued)
Push once the FUNCTION button to
which the FOCUS-IN-RED function is
assigned.
Normal screen FOCUS-IN-RED display
Push the
same button
once more
Displays in red the section of the
image that is being focused
The aspect of 16:9 in the screen example.
About FOCUS-IN-RED
When the FOCUS-IN-RED function is used, the section that is being focused is displayed in an easy-to-understand
red, making camera focus adjustments easy.
Each time the button from [FUNCTION1] to [FUNCTION3] to which the FOCUS-IN-RED function is assigned
is pushed, the display is switched (the FOCUS-IN-RED function must be assigned to one of the buttons from
[FUNCTION1] to [FUNCTION3] in order to be able to use the FOCUS-IN-RED function).
When the FOCUS-IN-RED function is displayed, the detection sensitivity level (0 - 30) can be changed with the
FOCUS-R knob. 30 is the most sensitive detection.
Each time the FUNCTION button to which the CROSS HATCH function
is assigned is pushed, the display is switched as follows
With HD/SD (16:9) images
With SD (4:3) images
About CROSS HATCH
When the CROSS HATCH function is used, markers are displayed at constant vertical and horizontal intervals
in order to make it easier to decide the picture composition. The marker values are fixed at 1 dot or 1 line for the
line width and 50 dots or 50 lines for the interval.
Each time the button from [FUNCTION1] to [FUNCTION3] to which the CROSS HATCH function is assigned is
pushed, the display is switched.
Push
once Push
twice
Displays a light cross
hatch Displays a dense cross
hatch
Push 3 times (returns to cross hatch display off)