Panasonic KX-TDE100 - Manual (Page 107)

1.3 Telephone Features and Operation
Operating Manual 107
Call Transfer Using SDN Button
You can transfer a call to a PDN extension with a simple operation using a corresponding SDN button.
To transfer a call to a PDN extension
1.3.50 Printing Message
You can record a variety of information from your extension using up to 8 preprogrammed messages.
Message information from all extensions is recorded with the PBX. For example, it is possible to use this
feature as a time card by selecting preprogrammed "sign in" and "sign out" messages.
In a hotel-type environment, this feature can be used to record room information from a room extension.
For a list of preprogrammed messages, consult your dealer.
To record
• System programming is required to use this feature during a conversation with an extension.
• * When an SDN button is in Standard SDN Key Mode, you have to press the SDN button twice
to transfer the call, unless you used that SDN button to answer an incoming call.
Customizing Your Phone
• 3.1.2 Personal Programming—Preferred Line Assignment—Incoming
Select the seized line when going off hook.
• 3.1.2 Personal Programming—Preferred Line Assignment—Outgoing
Select the seized line when going off-hook.
• 3.1.4 Customizing the Buttons
Create or edit a Primary Directory Number (PDN) or Secondary Directory Number (SDN)
button.
On-hook. Talk.
During a conversation
This step can be omitted.
(SDN)
Press SDN.
PT/PS
*
Off-hook. On-hook. Enter 761. Enter message
number (1 –8).
Enter parameter
if required.
PT/SLT
parameter
Enter #.
7 6 1 message no.
C.Tone
*