Panasonic KX-TDE100 - Manual (Page 23)

1.1 Before Operating the Telephones
Operating Manual 23
Customized Buttons
If the term is in parentheses like (Account) in this manual, it means a flexible button has been made into an
"Account" button. To customize, refer to "3.1.4 Customizing the Buttons".
Programmable Feature (PF):
Located on the upper part of the Flexible
button array or on the DSS Console.
Assigns the desired button and used to
access the stored feature. Mostly used as
a One-touch Dialing button. (Only the "F
and number" may be shown on some
telephones.) MODE:
Used to shift the display to access various
features.
SELECT:
Used to select the displayed item or to call
the displayed phone number. SHIFT:
Used to access the second level of Soft
button features.
ENTER:
Used to confirm the selected item. CANCEL:
Used to cancel the selected item.
NEXT PAGE:
Used to switch the page for the Self
Labeling feature. (KX-NT366 only)
Button Feature
Loop-CO (L-CO)
Used to access an idle CO line for making outside calls.
Incoming outside calls from any CO line arrive at this button.
Group-CO (G-CO)
Used to access an idle CO line in a specified CO line group for making outside
calls.
Incoming calls from CO lines in the assigned CO line group arrive at this button.
Single-CO (S-CO) Used to access a specified CO line for making or receiving outside calls.
Direct Station Selection (DSS)
Used to access an extension with one touch.
It is also possible to be changed to the other feature button.
One-touch Dialing Used to access a desired party or system feature with one touch.
Incoming Call Distribution
Group (ICD Group) Used to access a specified incoming call distribution group for making or
receiving calls.
Message
Used to leave a message waiting indication or call back the party who left the
message waiting indication.
Message for Another
Extension
Used to have a Message button for another extension.
Call Forwarding (FWD)/Do Not
Disturb (DND)—Both calls
Used to forward all calls to a specified destination or refuse.
FWD/DND—Outside calls Used to forward CO line calls to a specified destination or refuse.
FWD/DND—Intercom calls Used to forward intercom calls to a specified destination or refuse.
Group FWD—Both calls Used to forward all the calls to your group to a specified destination.
(PF)
MODE
SELECT SHIFT