1 before operating the telephones, E 18, What kind of telephone can be used – Panasonic KX-TDE100 User Manual
Page 18: Feature numbers
1.1 Before Operating the Telephones
18
Operating Manual
1.1
Before Operating the Telephones
1.1.1
Before Operating the Telephones
What Kind of Telephone Can Be Used?
You can use the following types of telephone with this PBX:
•
Panasonic IP Proprietary Telephone (IP-PT)
(e.g., KX-NT346 or KX-NT366)
•
SIP Extension
(SIP Hardphone/SIP Softphone)
•
Panasonic Proprietary Telephone (PT)
(e.g., KX-T7636)
•
Panasonic Portable Station (PS)
(e.g., KX-TD7690)
•
Single Line Telephone (SLT)
(e.g., rotary pulse telephone)
Which features are available depend on the type of telephone being used. If you are using a Panasonic
proprietary telephone with a special feature button such as
or a display (Display PT) or both, you can
follow the operation with the button or display messages for easy programming.
If you use a large display telephone (e.g., KX-NT346 or KX-T7636), you can follow the displayed messages
to use the features. If your telephone does not have feature buttons and/or a display, you may operate the
PBX by entering a feature number instead. Follow the operation for your type of telephone.
If you use a Console, you can use the buttons on the Console as the buttons on the connected proprietary
telephone.
Registration for your Portable Station (PS)/SIP Extension
Your PS/SIP Extension must be registered with the PBX and assigned an extension number before initial
use, through system programming. To confirm the extension number of your PS, refer to "Your extension
information" in "3.1.2 Personal Programming". For SIP Extension users, follow the instructions for your SIP
Extension.
Feature Numbers
To use certain features, you need to enter specified feature numbers (and an additional parameter, if
required).
There are two types of feature numbers as follows:
•
Flexible feature number
•
Fixed feature number
•
If you use a Panasonic proprietary
telephone which does not have feature
buttons, you may change one of the unused
flexible buttons to a feature button. Refer to
"3.1.4 Customizing the Buttons".
REDIAL