Panasonic KX-TDE100 - Manual (Page 44)

1.3 Telephone Features and Operation
44 Operating Manual
1.3.11 Call Transfer
– Transferring to an Extension in the PBX
– Transferring to an Outside Party Using the PBX Service
Transferring to an Extension in the PBX
To transfer
• You can transfer a held call without talking, and go on-hook even if the transferred party does
not answer the call. (Not available for SIP Extensions.)
If a transferred call is not answered within a specified time, it will ring at a preprogrammed
extension, if set, or at your extension again. If you are off-hook at that time, you will hear an
alarm tone. If an outside call is not answered within a specified time, it is automatically
disconnected.
• For users of SIP Extensions:
– Even if your telephone has a TRANSFER button, you cannot use it to transfer calls.
Please make sure to use the HOLD button.
– The transfer operation for SIP Extension users may differ from the steps in this section,
and may vary depending on the type of telephone being used.
Press DSS or dial
extension number.
On-hook. Talk.
During a conversation
This step can be omitted.
PT/PS
Press TRANSFER.
extension no.
OR
(DSS)
TRANSFER
C.Tone
Dial extension
number. On-hook. Talk.
During a conversation
SLT
Press Recall/
hookswitch.
extension no.
C.Tone
This step can be omitted.