Panasonic AJ-SD930BE - Manual (Page 47)

47 (E)
CONTENTS
Setup menus
The underlined items indicates the initial setting.
USER menu <VIDEO>
No./Item Description No./Item Description
621
CCR MODE
SD955B This selects the cross color processing
during playback.
0000 OFF :
The cross color is output with no changes
made.
0001 ON :
The cross color can be reduced.
<Note>
This setup menu is not displayed in the 625i
system.
622
SETUP 25
SD955B For setting 7.5% setup processing to be
performed on input and output signals in the
DVCPRO (25 Mbps) mode.
When the STOP button is pressed, operation is
transferred to the sub-screen, and the setup level
is set for each output. To return from the sub-
screen, press the STOP button again.
<Note>
This setup menu is not displayed in the 625i
system.
00
CMPST IN
Sub-screen
This selects the 7.5% setup processing for
the input composite signal.
0000 THRU :
The signal is recorded in its original form.
0001 CUT :
The signal is recorded with the 7.5% setup
removed.
02
CMPNT IN This selects the 7.5% setup processing for
the input component signal.
0000 THRU :
The signal is recorded in its original form.
0001 CUT :
The signal is recorded with the 7.5% setup
removed.
03
CMPNT OUT This selects the 7.5% setup processing for
the output composite, component and serial
(digital) signal.
0000 THRU :
The signal is output in its original form.
0001 CUT :
The signal is output with the 7.5% setup
removed.
0002 ADD :
The signal is output with the 7.5% setup
added.
01
CMPST OUT This selects the 7.5% setup processing for
the output composite signal.
0000 THRU :
The signal is output in its original form.
0001 ADD :
The signal is output with the 7.5% setup
added.
<Note>
Bear in mind the setting for sub-screen item No.
03 (CMPNT OUT) of setup menu item No. 622
(SETUP 25).
620
ESR MODE
This selects the operation mode for edge
subcarrier reduction (ESR) in the playback
circuit.
0000 OFF :
The mode is forcibly set to OFF.
0001 AUTO :
The mode is automatically set to ON or OFF
depending on the VTR operation.