Panasonic AJ-SD930BE - Manual (Page 76)

76 (E)
CONTENTS
SDTI interface
Digital data input/output operations using the SDTI
format (compressed digital interface) are enabled by
installing the AJ-YAC930G SDTI board (optional
accessory) in this unit.
<Notes>
SDTI (Serial Data Transport Interface) complies with
the SMPTE 305M standard.
The data stream format transferred via the SDTI
complies with the SMPTE 321M standard.
Precautions to observe when using the
SDTI signals
O The unit can record only if the SDTI input signals
are 1a transfer signals in the DVCPRO50 or
DVCPRO format selected by setup menu No. 012
(SYS FORMAT).
However, when playback signals other than normal
1a playback signals have been input, there is no
guaranty for the pictures and sound recorded or for
pictures and sound with EE.
O Editing operations can be performed only when all
the video and audio signals as well as the time
codes in the SDTI input signals are regular data
based on the DVCPRO50 or DVCPRO format
selected by setup menu No. 012 (SYS FORMAT).
O
CUE signals are not transferred by the SDTI
interface.
O
SDTI dubbing is not possible from tapes recorded
using the DV or DVCAM format.
Use SDI when dubbing tapes recorded in the DV or
DVCAM format.
O
When playing back a DV or DVCAM format tape,
DV compressed signals (Compliant with IEC61834-
2.) serve as the SDTI output.
O
The video and audio signals in the SDTI output
signals cannot be adjusted.
O During SLOW/STILL playback, the unprocessed
video and audio signals are output as the SDTI
output.
When these video and audio signals are to be
monitored using another device, they may differ
from the video and audio signals played back by
this unit.
PUSH PUSH
PUSH PUSH
PUSH AC IN
SIGNAL GND
AES/EBU
SDI
SDTI
ANALOG
CH1/2 IN
Y
VIDEO
VIDEO OUT
SERVICE ONLY
REMOTE IN/OUT CH1 CH2 AUDIO IN
ENCODER REMOTE
RS-232C
PARALLEL
REMOTE OUT
IN
REF VIDEO
IN
ON
OFF
PB
PR
Y 1
2 (WFM)
3 (SUPER)
PB
PR
OPTION
CH3/4 IN
CH1/2 OUT
CH3/4 OUT
REMOTE
75 Ω
ON
OFF
75 Ω
ANALOG
TC IN
IN
ACTIVE THROUGH
OUT
1
TC OUT
MON L
MON R
CH4 CH3
CH1 CH2 AUDIO OUT
CH4 CH3
2
OPTION
IN OUT
1
2
3 (SUPER)
PUSH PUSH
PUSH PUSH
PUSH AC IN
SIGNAL GND
AES/EBU
SDI
SDTI
ANALOG
CH1/2 IN
Y
VIDEO
VIDEO OUT
SERVICE ONLY
REMOTE IN/OUT CH1 CH2 AUDIO IN
ENCODER REMOTE
RS-232C
PARALLEL
REMOTE OUT
IN
REF VIDEO
IN
ON
OFF
PB
PR
Y 1
2 (WFM)
3 (SUPER)
PB
PR
OPTION
CH3/4 IN
CH1/2 OUT
CH3/4 OUT
REMOTE
75 Ω
ON
OFF
75 Ω
ANALOG
TC IN
IN
ACTIVE THROUGH
OUT
1
TC OUT
MON L
MON R
CH4 CH3
CH1 CH2 AUDIO OUT
CH4 CH3
2
OPTION
IN OUT
1
2
3 (SUPER)
Reference signal
generator
Source
Recorder
Connections involving two units
SDTI signals