Panasonic AJ-SD930BE - Manual (Page 55)

55 (E)
CONTENTS
Setup menus
The underlined items indicates the initial setting.
USER menu <V BLANK>
No./Item Description
803
TELETEXT
DET
For selecting the method used to detect the
lines in which the teletext signals are to be
recorded.
0000 OFF :
The teletext signals are not recorded.
0001 AUTO :
The teletext signals are automatically detected
and recorded.
0002 MANU :
The lines in which the teletext signals are to be
recorded are selected and set.
<Notes>
O The number of lines in which the teletext
signals can be recorded depends on the
number of recording lines which was entered
as the setup menu No. 800 (ADD LINE 25) or
No. 801 (ADD LINE 50) setting. [See “Number
of lines which can be set for teletext.”]
O When setting “MANU” is selected and the
STOP button is pressed, operation transfers to
the sub-screen, and the number of recording
lines can be selected.
To return from the sub-screen, press the STOP
button again.
O When the input signal is a non-standard signal
or N-STD has been selected for the setup
menu No. 303 (STD/NONSTD) setting, teletext
signals will not be played back correctly in EE
mode.
No./Item Description
804
BLANK LINE
Sub-screen
This turns the blanking ON or OFF in the
vertical blanking period of the video output
signals.
0000 BLANK :
Blanking is effected forcibly for all lines.
0001 THRU :
No blanking is effected for any of the lines.
0002 MANU :
Blanking ON or OFF is selected for each line.
<Note>
When setting “MANU” is selected and the STOP
button is pressed, operation transfers to the sub-
screen, and ON or OFF can be selected for each
line. To return from the sub-screen, press the
STOP button again.
[625i system]
00
REC LINE1
:
14
REC LINE15
[525i system]
00
REC LINE1
:
12
REC LINE13
SD955B
Sub-screen
For selecting the lines in which the teletext
signals are to be recorded.
[625i system] [525i system]
0000 OFF 0000 OFF
0001 7&320 0001 10&273
0002 8&321 0002 11&274
0003 9&322 0003 12&275
0004 10&323 0004 13&276
0005 11&324 0005 14&277
0006 12&325 0006 15&278
0007 13&326 0007 16&279
0008 14&327 0008 17&280
0009 15&328 0009 18&281
0010 16&329 0010 19&282
0011 17&330 0011 20&283
0012 18&331 0012 21&284
0013 19&332 0013 22
0014 20&333
0015 21&334
0016
22
SD955B
Number of lines which can be set for TELETEXT
The number of lines differs, depending on whether ON or OFF has
been selected for the setup menu item No. 660 (UMID REC) setting.
O When 25 Mbps is the recording/playback format.
No. 800:
ADD LINE 25
setting value
Number of lines which can be set
[625i system] [525i system] SD955B
12 10 14 13 OFF
5 4 7 5 YC422
8 5 10 8 YC411
12 10 14 13
Y1_B/W,
Y1_BPF, C1
5 4 7 5
Y2_B/W,
Y2_BPF, C2
UMID REC:
ON
UMID REC:
OFF
UMID REC:
ON
UMID REC:
OFF
O When 50 Mbps is the recording/playback format.
No. 801:
ADD LINE 50
setting value
Number of lines which can be set
[625i system] [525i system] SD955B
12 9 15 10
OFF, YC422,
Y4_B/W,
Y4_BPF, C4
UMID REC:
ON
UMID REC:
OFF
UMID REC:
ON
UMID REC:
OFF
[625i system]
00
LINE 7&320
:
15
LINE 22&335
[525i system]
00
LINE 10&273
:
11
LINE 21&284
SD955B
0000 BLANK : Blanking is forcibly effected.
0001 THRU : No blanking is effected.