Panasonic TC-43P250H - Manual (Page 22)

22
Sound System Selection (Different region use differing systems)
This function is used only in the TV mode when the sound is not clear or no sound is produced on a Programme
Number, and is not applicable in AV mode .
Press to select the “SOUND SYS”.
1
2
Press until the optimum sound is obtained.
SYS SELECT
CH SELECT
AUTO TUNE
MANUAL TUNE
FINE TUNE
SKIP
SOUND SYS 6. 0MHz
COLOUR SYS AUTO
OFF
JAPAN
POSITION
TUNING MENU
Sound System Condition.
SYS SELECT
CH SELECT
AUTO TUNE
MANUAL TUNE
FINE TUNE
SKIP
SOUND SYS 6. 0MHz
COLOUR SYS AUTO
OFF
JAPAN
POSITION
TUNING MENU
Note:
These are different sound broadcast transmission systems applicable to differing countries.
The sound system will change as shown.
This returns the set to the normal viewing condition.
The selected Sound System is automatically memorised.
4.5MHz
6.5MHz
5.5MHz
6.0MHz
3
Press to exit from the “SOUND SYS”.
TV/AV
Tuning Channels