Automatic tune, Helpful hint, Tuning channels – Panasonic TC-43P250H User Manual

Page 26

Advertising
background image

26

The best tuning position is automatically
memorized.

Automatic Tune

(Channel Select and Regional System must already be set; Refer to pages 21)

This TV uses automatic tuning to determine whether or not a broadcast signal is being sent which it can receive, and
automatically prepares so that the channel selection can respond to both the position select and direct select modes.

SYS SELECT

CH SELECT

AUTO TUNE

MANUAL TUNE

FINE TUNE
SKIP

SOUND SYS

6. 0MHz

COLOUR SYS

AUTO

OFF

ACCESS

JAPAN

POSITION

TUNING MENU

AUTO TUNE

Press to select the “AUTO TUNE”.

Press to access to the “AUTO TUNE”.

SOUND SYS

4.5MHz

6.5MHz

5.5MHz

6.0MHz

After all stations are tuned, the on-screen display will automatically change from “AUTO
TUNE” to “SOUND SYS” Position.

SYS SELECT

CH SELECT

AUTO TUNE
MANUAL TUNE

FINE TUNE
SKIP

SOUND SYS

6. 0MHz

COLOUR SYS

AUTO

OFF

JAPAN

POSITION

TUNING MENU

CH 29

29

SETUP : RETURN TO TUNING MENU
TV/AV : TO EXIT

AUTO SETUP IN PROGRESS

SEARCHING : PLESE WAIT

STORED CH29

Search Start.

Note:
When sound volume is too small to confirm, tune it up by using the sound volume button on the remote control.

1

2

3

Press to check each station sequentially.

1

2

If necessary, repeat steps 1 to 2 for each Programme Number.

4

Press to exit from the Tuning Menu.
This returns the set to the normal viewing condition.

Helpful Hint

(1) If a clear picture with correct colours cannot be obtained when a Broadcast or AV signal is received, refer to the

“Colour System Selection” operation on page 23.

(2)

After the Automatic tune is finished, press this button to confirm the tuning condition for each
Programme Number. If some Programme Numbers are unused (no TV stations), it is possible to
skip such Programme Numbers. Please refer to the Programme Number Skip operation on page
29.

Press to improve the Sound quality, if the Sound
is not clear or no sound is produced on a
programme Number Position.

Tuning Channels

TV/AV

Press to exit from the Tuning Menu.
This returns the set to the normal viewing condition.

TV/AV

When found a station.

Advertising
This manual is related to the following products: