Panasonic TC-43P250H - Manual (Page 34)

34
Setup Adjustment
1
Press to display the SETUP MENU.
2
Press to select the desired function.
Press to adjust or change the function.
3
Press to go back to watching TV.
SET UP
TV/AV
Switches the TV off within a preset time which you can choose from between 0 to 90
minutes in 15 minute intervals.
PAL, SECAM and NTSC 3.58 are different colour signal broadcast transmission
systems applicable to differing countries. NTSC 4.43 is a trick playback mode used
in special VCR to playback NTSC recorded video tapes through PAL television
equipment.
OFF
60 75 90
30 15 45
DYNAMIC NORMAL OFF
TELETEXT
OFF TIMER
FLICKER REDUC.
STROBE
CH COLOUR SET
VCR / GAME
OFF
OFF
DYNAMIC
FASTEXT
COLOUR SYS AUTO
SETUP MENU
OFF TIMER
TELETEXT
OFF TIMER
FLICKER REDUC.
STROBE
CH COLOUR SET
TEXT SELECT ENGLISH
VCR / GAME OFF
OFF
DYNAMIC
FASTEXT
SETUP MENU
FLICKER REDUCTION
Lets you control any picture movement. Set to Dynamic to activate motion
compensation, to smooth the image and get rid of picture movement. Set to Normal
to correct minor picture movement, or if slight ghosting of figures occurs when using
the Dynamic setting. Set to Off to have no flicker reduction at aIl, occasional broadcasts
may benefit from using this setting.
TELETEXT
OFF TIMER
FLICKER REDUC.
STROBE
CH COLOUR SET
TEXT SELECT ENGLISH
VCR / GAME OFF
OFF
DYNAMIC
FASTEXT
SETUP MENU
COLOUR SYSTEM
AUTO PAL
NTSC3.58 NTSC4.43
SECAM
During AV mode, COLOUR SYSTEM is displayed.
If a clear picture with current colours cannot be obtained when a Broadcast or AV
signal is received. The colour system will change as shown.
TELETEXT
OFF TIMER
FLICKER REDUC.
STROBE
CH COLOUR SET
TEXT SELECT ENGLISH
VCR / GAME OFF
OFF
DYNAMIC
FASTEXT
SETUP MENU
TUNING MENU
PICTURE SHIFT
CHILD LOCK
CONVERGENCE
LANGUAGE
OFF
OFF
ACCESS
SETUP MENU
ENGLISH
Note:
In NTSC when set the SCAN MODE to 100Hz MODE, this function is not available.