Palm PalmTM m100 - Manual (Page 145)

Chapter 6 Page 137
5. Click the Modem tab to display the modem settings and adjust the
options as needed. See “Conducting a HotSync operation via
modem” later in this chapter for more information.
6. Click OK.
To set the HotSync options on a Macintosh:
1. Double-click the HotSync Manager icon in the Palm folder.
2. Click the HotSync Controls tab and select any of the following
options.
Serial Port Identifies the port that HotSync Manager uses
to communicate with the cradle/cable. The
Palm Desktop installation software
automatically detects the port to which you
connected the cradle/cable. If necessary, you
can change the port selection.
Note: Your handheld cannot share this port
with an internal modem or other
device.
Speed Determines the speed at which data is
transferred between your handheld and Palm
Desktop software. Try the As Fast As Possible
rate first, and adjust downward if you
experience problems. This setting allows Palm
Desktop software and your handheld to find
and use the fastest speed.