To set the auto-off delay, System, alarm, and game sounds, To set the system and alarm sounds – Palm PalmTM m100 User Manual
Page 171: Beam receive, To change the beam receive setting, System, alarm, and game sounds beam receive
Chapter 7
Page 163
To set the Auto-off delay:
1. Tap the Auto-off pick list.
2. Tap the setting you want to use for the automatic shutoff feature:
30 seconds, 1 minute, 2 minutes, or 3 minutes.
System, alarm, and game sounds
Your handheld uses a variety of sounds. The System, Alarm, and
Game Sound settings enable you to turn the sounds on or off, and to
adjust the volume level.
To set the system and alarm sounds:
1. Tap the System Sound pick list and select the sound level.
Note: When you turn off the System Sounds, you also turn off the
“chime” tones associated with the HotSync operation.
2. Tap the Alarm Sound pick list and select the sound level.
3. Tap the Game Sound pick list and select the sound level.
Note: The Game Sound setting works only with games that are
programmed to respond to this setting. Older games
typically do not respond to this setting.
Beam Receive
You can choose to turn off the Beam Receive feature. This prohibits
anyone from beaming information to your handheld. It also results in
a slight saving of battery power.
To change the Beam Receive setting:
■
Tap the Beam Receive pick list and select On or Off.