Palm 650 - Manual (Page 17)

Section 1A: Setting Up Software 5
Se
ttin
g Up
So
ft
w
a
re
Inserting the Battery
1. Press the Battery Door Release button and slide the battery door downward
to remove it from your Treo 650.
2. Align the metal contacts on the battery with the contacts inside the battery
compartment.
3. Insert the battery into the compartment at a 45 degree angle, and then
press it into place.
4. Slide the battery door onto the back of the device until it clicks into place.
5. When the Welcome screen appears, follow the onscreen instructions to set
up your Treo 650.
Notch
Battery
Contacts
Phone
Contacts
Battery Door Release