Palm 650 User Manual
Page 170
158
Section 2E: Customizing Your Device
Ⅲ
On phone power off locks your device each time you turn it off. When this
setting is active, you must enter your lock code each time you turn your
device on again.
Ⅲ
Immediately locks your device when you select OK. The next time you
turn your device on again you must enter your lock code. After that, you
can turn your device on again without entering your lock code.
6.
When prompted, enter the lock code, and then select OK. (Unless you
changed your lock code, the lock code is the last four digits of your phone
number.)
7.
If you want to change the lock code, select Change Lock Code, enter a new
lock code, and then select OK. Repeat this step to verify the new lock code.
8.
Based on the option you selected in step 5, do one of the following to lock
your device:
Ⅲ
For On phone power off, turn off your device.
Ⅲ
For Immediately, select OK.
9.
To unlock your device, dial a number, enter your lock code, and then
select OK.
System Password Lock
To protect your personal information, you can lock the system so that you need to
enter your password to access any of your information or use other features of
your Treo 650.
Note:
To permanently unlock your device, open the
Options
menu, and then
select
Phone Lock
. Uncheck the
On phone power off
box. Your lock
code is required to change this setting.