Palm 650 - Manual (Page 90)

78 Section 2B: Using Your Device’s Phone Features
Ⅲ Yes automatically establishes connections with devices with which
you’ve created a trusted pair. New devices can request a connection
which you can accept or refuse.
Ⅲ No enables devices with which you’ve already formed a trusted pair to
find your device. New devices cannot request a connection.
5. Select Setup Devices.
6. Select Hands-free Setup.
7. Follow the onscreen instructions to create a
trusted pair with the specific device. (In some
cases you may need to perform setup steps
on the other device before you can complete
this step.)
8. After you finish setting up the device, close the
Bluetooth application.
Tips for Handsfree Devices With Bluetooth Wireless Technology
ⅷ If you’re using a handsfree device with Bluetooth wireless technology, the
Treo 650 automatically routes all calls to that device. When a call comes in,
your Treo 650 rings and the headset beeps. However, even if you pick up the
call on your Treo, the call goes to the headset.
ⅷ If a headset with Bluetooth wireless technology is paired and within range
when you place a call, the call is routed to the headset, not the handset.
Note: Both your device and the Bluetooth setting must be On for your device
to be discoverable.