Philips MX5500D/21 - Manual (Page 16)

16
English
Main unit and remote control
1 STANDBY ON
– Switches to Eco Power standby mode or turns
on the system.
– *Switches to standby mode.
2 Disc trays 1~5
3 OPEN•CLOSE
0 (DISC1~5)
– Opens/Closes the individual disc tray.
4 iR SENSOR
– Point the remote control towards this sensor.
5 MEDIA SLOT
– Plug the memory card into the PC card adaptor
and insert it into the media slot for viewing.
6 EJECT
0
– Ejects the memory card from the slot.
7 Speaker display panel
8 System display panel
9 TUNING
– Switches between frequency tuning and preset
tuning mode.
0 PROG (PROGRAM)
– DISC: starts programming.
– TUNER: starts *automatic/ manual preset
programming.
– CLOCK: selects 12- or 24-hour clock display.
! ÉÅ PLAY•PAUSE
– DISC: starts/pauses playback.
– TUNER: *enters Plug & Play mode and/or starts
preset radio station installation (only on the
main unit).
Ç STOP
– Exits an operation.
– DISC: stops playback or *clears a programme.
– TUNER: *erases a preset radio station.
S
SEARCH T (PREV/NEXT)
– DISC: *searches backward/forward or selects a
track.
– TUNER: tunes the radio frequency up/down or
selects a preset radio station.
(On the remote, it can only tune the radio
frequency up/down).
– CLOCK: sets the minutes and hours.
Functional Overview
(illustration on page 3)
* = Press and hold the button for more than two seconds.
@ SEATING (only available in Multi-channel
mode)
– Turns on/off the seating control on the TV. Use
the VOLUME control on the main unit or
joystick on the remote to select the desired
seating position.
# SURROUND (SURR.)
– Selects multichannel surround, 3D sound or
stereo mode.
$ SOURCE
– Selects the relevant active mode : TV/AV, DISC,
MEDIA SLOT, TUNER, AUX or DI.
– DISC: toggles between DISC and MEDIA SLOT.
– TUNER: toggles between FM and MW band.
– AUX/DI: toggles between AUX and DI (Digital
Input) mode.
% CLOCK•TIMER
– *Enters clock or timer setting mode.
– Shows clock display for a few seconds.
^ MIC LEVEL
– Adjusts the mixing level when using the
microphone.
MIC
– Plug in the microphone jack.
& VOLUME (VOL +-)
– Adjusts the volume level.
* BASS / TREBLE
– Selects bass or treble sound. Use the VOLUME
control to select the desired enhancement level.
( n
– Plugging in the headphones jack. The speakers
output will be cancelled.