Sound and volume controls, Sound control, Volume control – Philips MX5500D/21 User Manual

Page 40

Advertising
background image

40

English

Sound Control

IMPORTANT!

For proper surround sound, make sure
the speakers and subwoofer are
connected (see page 12).

Selecting surround sound

Press

SURROUND (SURR.) to select :

MULTI-channel, 3D SOUND or STEREO.

The availability of the various surround sound

modes depends on the number of speakers
used and the sound available on the disc.

The centre and surround speakers operate

only when the DVD home cinema system is set
to Multi-channel mode.

The available output modes for Multi-channel

include: Dolby Digital, DTS (Digital Theatre
Systems) Surround, Dolby Surround and Dolby
Pro Logic.

Stereo broadcasts or recordings will produce

some surround channel effects when played in a
surround mode. However, mono (single channel
sound) sources will not produce any sound from
the surround speakers.

Note:
– You are not able to select the surround sound
mode if the system menu/menu bar is turned on.

Turning on/off clear voice effect

You can enhance the centre and surround
sound outputs by activating the clear voice
sound feature if you have selected Multi-channel
as the surround mode.

Press

VOICE on the remote to select “CLEAR

VOICE ON

”.

To turn off the setting, press VOICE again to

select “CLEAR VOICE OFF”.

Changing subwoofer volume level

Press

SUB +/- on the remote to adjust

subwoofer volume level (-6dB to + 6dB).

Adjusting Bass/Treble level

The BASS (low tone) and TREBLE (high tone)
features enable you to define the sound-
processor settings.

1

Press

BASS or TREBLE.

The level indicator appears.

2

Within five seconds, use the

VOLUME control

to adjust the Bass or Treble level (-3 to +3).

If the volume control is not used within five

seconds, it will resume its normal volume control
function.

Selecting digital sound effects

Select a preset digital sound effects that matches
your disc’s content or that optimises the sound
of the musical style you are playing.

Press

SOUND on the remote.

When playing movie discs, you can select :
CONCERT, DRAMA, ACTION or SCI-FI.

When playing music discs or while in TUNER or
AUX/DI mode, you can select : ROCK,
DIGITAL, CLASSIC or JAZZ.

Volume control

Adjust

VOLUME control (or press

VOL +/-on the remote) to increase or
decrease the volume level.

"VOL MIN" is the minimum volume level and

“VOL MAX” is the maximum volume level.

To listen through the headphones

Connect the headphones plug to the n socket
at the front of the DVD system.

The speakers will be muted.

To turn off the volume temporarily

Press

MUTE on the remote.

Playback will continue without sound and

"MUTE" appears.

To restore the volume, press MUTE again or

increase the volume level.

Sound and Volume Controls

Advertising