Panasonic AW-RP50N - Manual (Page 18)

18
Setting the functions
This section describes how the unit’s functions are set.
The following functions can be set.
  Setting of the remote camera operations
  Registration of functions in the USER buttons
  Setting the speed at which to move to the preset memory
setting position
  Setting the control items used when preset data is
executed
  Controlling the peripheral devices connected to the
remote cameras
• ND filter
• AC adapter
(AW-PS300A)
• Defroster
• Wiper
• Heater, fan
• Halogen lamp
  Assignment of preset data when emergency interrupts
occur
  Locking of button operations
The settings are established using the [SETUP] menu.
First, the basic menu operations will be described.
1
Set the MENU button to ON.
Press the MENU button to light its indicator.
2
Set the PRESET MEMORY/MENU 9 button
(SETUP) to ON.
When the button is pressed and its indicator lights, the
[SETUP] menu is displayed on the LCD panel.
[1]USER ▼
3
Turn the F1 dial to display the target menu
item, and press the F1 dial.
For details on the [SETUP] menu items, refer to the
“Table of menu items”.
[4]OPERATE
1.PAN DIR ▼
NORMAL
Press the F1 dial.
4
Turn the F1 dial to select the target menu item.
2.TILT DIR
NORMAL
1.PAN DIR ▼
NORMAL
Turn the F1 dial.
5
Turn the F2 dial to select the setting.
Then press the F2 dial to change the setting.
2.TILT DIR
NORMAL
2.TILT DIR
REVERSE
Turn the F2 dial, and then press
it.