Panasonic AW-RP50N - Manual (Page 5)

5
How to turn the power of the remote cameras on and off
 How to turn the power of the
remote cameras off
Follow one of the procedures below to turn off the power of
the remote cameras.
  Turning off the power one camera at a time
  Turning off the power of a multiple number of cameras
• Turning off the power of all the cameras
• Turning off the power of the selected group of cameras
Each of these procedures is described in turn below.
Turning off the power one camera at a time
1
Select the remote camera.
When the corresponding CAMERA STATUS/
SELECTION button is held down, the name of the
remote camera is displayed on the top line of the LCD
panel and POWER ON is displayed on the bottom line.
2
Turn the F2 dial to select “OFF”, and press the
F2 dial.
The power of the selected remote camera is turned off.
POWER ALARM F1 CAMERA
OSD
R/B GAIN R/B PED
SYSTEM SETUP CAMERA SCENE/MODE DETAIL DELETE STORE
PAGE MENU F2 EXIT
USER2 USER1
PT ACTIVE AUTO IRIS
CAMERA STATUS / SELECTION
PRESET MEMORY / MENU
GAIN/PED
F2
F1
1 2 3
AWB/ABB
4
SHUTTER
5
1 2 3 4 5
6 7 8 9 10
CAM100<AW-HE50 >
POWER:OFF
1
2
Turning off the power of a multiple number of cameras
1
Set the MENU button to ON.
Press the MENU button to light its indicator.
2
Set PRESET MEMORY/MENU 8 button
(CAMERA) to ON.
When the button is pressed and its indicator is lighted,
the [CAMERA] menu is displayed on the LCD panel.
[1]GROUP ▼
3
Turn the F1 dial to display the [POWER] menu,
and press the F1 dial.
[2]POWER
1.CAM POWER ▼
ALL OFF
Press the F1 dial.
Turning off the power of all the cameras
4
Turn the F2 dial to select “ALL OFF”, and press
the F2 dial.
1.CAM POWER ▼
ALL OFF
The power of all the remote cameras is now turned off.
Turning off the power of the selected group of
cameras
4
Turn the F2 dial to select “GROUP OFF”, and
press the F2 dial.
1.CAM POWER ▼
GROUP OFF
The power of the selected group of remote cameras is
turned off.