Panasonic AW-RP50N - Manual (Page 28)

28
Setting linkup with the switcher
  Link setting
1
Set the MENU button to ON.
Press the MENU button to light its indicator.
2
Set PRESET MEMORY/MENU 9 button (SETUP)
to ON.
When the button is pressed and its indicator is lighted,
the [SETUP] menu is displayed on the LCD panel.
[1]USER ▼
3
Turn the F1 dial, display the SW LINK menu,
and press the F1 dial.
[2]SW LINK
1.SWLINK ▼
Off
Press the F1 dial.
4
Turn the F2 dial to select On, and then press
the F2 dial to change the setting.
1.SWLINK ▼
On
When “On” is selected as the item setting, the settings
mentioned below take effect, and the link with the switcher is
established.
Control can also be exercised by assigning this setting to a
USER button.