Panasonic AW-RP50N - Manual (Page 45)

45
Button Menu item Control device Initial value Setting
9 SETUP [1]USER 1.USER1 AWB SWLINK, BUSCONT, FASIST,
CAMSEL, TALLY_IP, CAMINF,
AWB, ABB, POWER OFF
2.USER2 ABB SWLINK, BUSCONT, FASIST,
CAMSEL, TALLY_IP, CAMINF,
AWB, ABB, POWER OFF
[2]SW LINK 1.SWLINK On Off, On
2.BUSCONT Off Off, On
3.BUS AUX AUX, PVW, PinP, KEY
4.FASIST Off Off, On
5.CAMSEL Off Off, On
6.TALLY_IP Off Off, On
7.P/T LEVER Self Self, SW
[3]SW DISP 1.CAMINF On Off, On
2.FORMAT On Off, On
3.CAMNAME On Off, On
4.SCENE On Off, On
5.GAIN On Off, On
6.SHUTTER On Off, On
7.IRIS On Off, On
8.FILTER On Off, On
9.ALARM On Off, On
[4]OPERATE 1.PAN DIR NORMAL NORMAL, REVERSE
2.TILT DIR NORMAL NORMAL, REVERSE
3.ZOOM DIR NORMAL NORMAL, REVERSE
4.FOCUS DIR NORMAL NORMAL, REVERSE
5.SPEED WITH Z AW-HE50 Off, On
AW-HE100 Off, 1, 2
AW-PH360, AW-PH400,
AW-PH405, AW-PH650 Off, 1, 2
6.SPEED TARGET P/T/Z/F P/T/Z/F, P/T
7.FOCUS/IRIS STANDARD STANDARD, EXCHANGE
8.P/T CURV 1 1 to 5
[5]PRESET 1.DIAG SPEED AW-HE50 1 to 30
AW-HE100 30 1 to 30
AW-PH360, AW-PH400,
AW-PH405, AW-PH650 30 1 to 30
2.SCOPE AW-HE50 30 MODE A, MODE B, MODE C
AW-HE100 30 “–––”
AW-PH360, AW-PH400,
AW-PH405, AW-PH650 “–––”
3.HOME POSITION SET
Table of menu items