Panasonic AW-RP50N - Manual (Page 7)

7
Setting and operating the preset memories
  Executing the preset data
1
Press one of the CAMERA STATUS/SELECTION
buttons 1 to 5 to select the remote camera to
be operated.
Select the remote camera which is to be pointed at the
camera angle registered in the preset memory.
2
After pressing the PAGE button, press the
PRESET MEMORY/MENU button to specify
the registered “Page number” of the preset
memory.
In this step, specify the registered “Page number” of the
preset memory.
  For details on the relationship between the “Preset
number”, “Page number” and “Number on the page”,
refer to the section entitled <Preset numbers and
registered pages>.
3
Press the PRESET MEMORY/MENU button to
specify the “Number on the page”.
The preset memory data is executed at the same time
as the “Number on the page” are specified.
R/B GAIN R/B PED
SYSTEM SETUP CAMERA SCENE/MODE DETAIL DELETE STORE
PAGE MENU F2 EXIT
USER2 USER1
PT ACTIVE AUTO IRIS
CAMERA STATUS / SELECTION
PRESET MEMORY / MENU
GAIN/PED
1 2 3
AWB/ABB
4
SHUTTER
5
1 2 3 4 5
6 7 8 9 10
1
2,3
2
  When the preset memory data is executed, the preset
number is displayed on the right side of the top level of
the LCD panel.
PRESET 1
PAGE:1 (1-10)
The preset number display is cleared when the power of
the unit or remote camera has been turned off or when
the camera group has been switched.
  In the case of the AW-HE50, the corresponding PRESET
MEMORY/MENU button will go off, and then it will light
again when preset memory data is executed.
In the case of another remote camera connected serially,
the corresponding PRESET MEMORY/MENU button will
simply just light.
  Deleting the preset memory
data
This function does not work with the AW-PH400.
Note
1
Press one of the CAMERA STATUS/SELECTION
buttons 1 to 5 to select the remote camera to
be operated.
Select the remote camera whose preset memory data is
to be deleted.
2
Press the DELETE button.
3
After pressing the PAGE button, press the
PRESET MEMORY/MENU button to specify the
“Page number” of the preset memory data to
be deleted.
In this step, specify the “Page number” of the preset
memory data to be deleted.
  For details on the relationship between the “Preset
number”, “Page number” and “Number on the page”,
refer to the section entitled <Preset numbers and
registered pages>.
4
Hold down the PRESET MEMORY/MENU
button to specify the “Number on the page”.
The preset memory data is deleted at the same time as
the “Number on the page” is specified.
When specifying the “Number on the page”, hold down
the PRESET MEMORY/MENU button.
Note
R/B GAIN R/B PED
SYSTEM SETUP CAMERA SCENE/MODE DETAIL DELETE STORE
PAGE MENU F2 EXIT
USER2 USER1
PT ACTIVE AUTO IRIS
CAMERA STATUS / SELECTION
PRESET MEMORY / MENU
GAIN/PED
1 2 3
AWB/ABB
4
SHUTTER
5
1 2 3 4 5
6 7 8 9 10
1
2
3, 4 3