Philips DVD760 - Manual (Page 10)

10
Connecting TV
COAXIAL OPTICAL
DIGITAL AUDIO OUT
PCM/ MPEG2/
Dolby Digital
VIDEO
S-VIDEO
L R
Y Pr/Cr Pb/Cb
PROGRESSIVE
INTERLACE
VIDEO IN
RIGHT
AUDIO IN
Back
of TV
LEFT
AUDIO IN
TO TV
VIDEO IN
TO TV
AUDIO IN
3
1
2
IMPORTANT!
– You only need to make one video
connection from the following
options, depending on the
capabilities of your TV system.
Using CVBS jack
1
Use the composite video cable (yellow)
to connect the DVD Player’s CVBS
(VIDEO) jack to the video input jack (or
labeled as A/V In, Video In, Composite or
Baseband) on the TV (cable supplied).
2
Set the PROGRESSIVE/INTERLACE
switch to INTERLACE.
3
To hear the sound of this DVD Player
through your TV, use the audio cables
(white/red) to connect AUDIO OUT (L/
R) jacks of the DVD Player to the
corresponding AUDIO IN jacks on the TV
(cable supplied).
ICAL
OUT
/
VIDEO
S-VIDEO
L R
Y Pr/Cr Pb/Cb
S-VIDEO IN
RIGHT
AUDIO IN
Back
of TV
LEFT
AUDIO IN
TO TV
AUDIO IN
TO TV
S-VIDEO IN
3
1
PROGRESSIVE
INTERLACE
2
Using S-Video jack
1
Use the S-Video cable to connect the
DVD Player’s S-VIDEO OUT jack to the
S-Video input jack (or labeled as Y/C or S-
VHS) on the TV (cable not supplied).
2
Set the PROGRESSIVE/INTERLACE
switch to INTERLACE.
3
To hear the sound of this DVD Player
through your TV, use the audio cables
(white/red) to connect AUDIO OUT (L/
R) jacks of the DVD Player to the
corresponding AUDIO IN jacks on the TV
(cable supplied).
Connections