Philips DVD760 - Manual (Page 11)

11
AXIAL OPTICAL
GITAL AUDIO OUT
PCM/ MPEG2/
Dolby Digital
VIDEO
S-VIDEO
L R
Y Pr/Cr Pb/Cb
PROGRESSIVE
INTERLACE
AUDIO IN
Y
Back
of TV
Pb/Cb
Pr/Cr
3
1
2
TO TV
AUDIO IN
TO TV
Y Pb/Cb Pr/Cr IN
IMPORTANT!
– Component Video connection
provides highest picture quality.
These options must be available on
your TV.
Using Component Video jack
(PrCr PbCb Y)
1
Use the component video cables (red/
blue/green) to connect the DVD Player’s
PrCr / PbCb / Y jacks to the
corresponding Component video input
jacks (or labeled as PrCr / PbCb / Y or
YUV) on the TV (cable not supplied).
2
Set the PROGRESSIVE/INTERLACE
switch to INTERLACE.
3
To hear the sound of this DVD Player
through your TV, use the audio cables
(white/red) to connect AUDIO OUT (L/
R) jacks of the DVD Player to the
corresponding AUDIO IN jacks on the TV
(cable supplied).
VIDEO
S-VIDEO
L R
Y Pr/Cr Pb/Cb
PROGRESSIVE
INTERLACE
Progressive / Interlace SELECTOR
This switch will change the type of signal
output from the Component Video Out
on the player.
Interlace:
Select this setting when connected to a
standard (interlace format) TV.
Progressive:
Select progressive when you have a TV
that can accept progressive signals (480/
525p) to enjoy accurate colour
reproduction and high quality images.
Connections