Philips DVD760 - Manual (Page 13)

13
Optional : Connecting 2-channel
Stereo
L
T
VIDEO
S-VIDEO
L R
Y Pr/Cr Pb/Cb
RIGHT
AUDIO IN
LEFT
AUDIO IN
STEREO
TO STEREO
AUDIO IN
PROGRESSIVE
INTERLACE
Stereo has Dolby Pro Logic or Right
/ Left Audio In jack
1
Select one of the video connections
(CVBS VIDEO IN, S-VIDEO IN,
COMPONENT VIDEO IN) depending on
the options available on your TV.
2
Set the PROGRESSIVE/INTERLACE
switch to INTERLACE for CVBS or S-
VIDEO connections.
3
Set the PROGRESSIVE/INTERLACE
switch to PROGRESSIVE for
COMPONENT VIDEO IN connection
with a Progressive Scan TV.
4
Use the audio cables (white/red) to
connect AUDIO OUT (L/R) jacks of
the DVD Player to the corresponding
AUDIO IN jacks on the stereo system
(cable supplied).
Optional : Connecting Digital AV
Receiver
COAXIAL OPTICAL
DIGITAL AUDIO OUT
PCM/ MPEG2/
Dolby Digital
S-VIDEO
L R
MAINS
Pr/Cr Pb/Cb
AV Receiver
COAXIAL IN
OPTICAL IN
OR
TO Digital AV Receiver
DIGITAL AUDIO IN
PROGRESSIVE
INTERLACE
Receiver has a PCM, Dolby Digital
or MPEG2 decoder
1
Select one of the video connections
(CVBS VIDEO IN, S-VIDEO IN, SCART or
COMPONENT VIDEO IN) depending on
the options available on your TV.
2
Set the PROGRESSIVE/INTERLACE
switch to INTERLACE for CVBS or S-
VIDEO connections.
3
Set the PROGRESSIVE/INTERLACE
switch to PROGRESSIVE for
COMPONENT VIDEO IN connection
with a Progressive Scan TV.
4
Connect either the COAXIAL or
OPTICAL jack of the DVD Player to the
corresponding COAXIAL or OPTICAL
Digital Audio In jack on your Receiver
(cable not supplied).
5
Set the DVD Player’s Digital Output to
PCM-ONLY or ALL depending on the
capabilities of your Receiver (see “Digital
Output”, page 32).
Helpful Hint:
–
If the audio format of the Digital Output
does not match the capabilities of your
receiver, the receiver will produce a strong,
distorted sound or no sound at all.
Connections