Philips DVD760 - Manual (Page 33)

33
DVD Menu Options
Audio – Analog output
Allows you to set the stereo analog
output of your DVD Player.
Stereo
When set to Stereo, the Dolby Digital
signals from the disc are downmixed
directly into analog stereo from the
AUDIO OUT jacks. Use this option when
connecting directly to a TV or stereo.
Dolby Surround-compatible
Use this option only when your DVD
Player’s AUDIO OUT jacks are connected
to a Dolby Pro-Logic decoder.
3D Sound
3D sound provides a virtual surround
sound experience using just two speakers.
Use this option when connecting directly
to a TV or stereo.
Use ↓ or ↑ to change the values, OK to confirm, ← to leave the
submenu
Audio
Digital Output
Analog Output
Setup Analog output
Stereo
Dolby Surr-com
3D Sound
PCM Output
Audio – PCM Output
If you connect the DVD Player to a PCM
compatible receiver via the digital outpu
(coaxial or optical) you may need to
adjust PCM OUTPUT.
Use ↓ or ↑ to change the values, OK to confirm, ← to leave the
submenu
Audio
Digital Output
Analog Output
Setup PCM output
48 kHz
96 kHz
PCM Output
48 kHz
When 48kHz has been selected, 96kHz
PCM data, (if available on disc) will be
converted to 48kHz.
96 kHz
96kHz PCM audio on non-copy protected
DVD discs will be played back at 96kHz.
For copy protected discs, the digital
output will be downsampled to 48kHz.
Features – PBC
Playback Control feature (only for VCD
2.0) can be set to ON or OFF
(see page
20 ‘Using the Disc Menu’ ).
Use → to toggle the values ↓ or ↑ to move to other options..
Features
Sleep Timer
Setup
PBC Off On