Panasonic AJ-P2C002SG - Manual (Page 161)

Me
nu
161 Menu: Menu Configuration
Menu
Notes
The items highlighted in grey cannot be selected by <USER MENU SELECT>.
The underlined items can only be selected by <USER MENU SELECT> as one whole page (with all sub-items). Individual
sub-items cannot be selected separately.
About Menu Description Tables
Menu Configuration
USER MENU
USER MENU SELECT
SYSTEM SETTING
PAINT
CAM OPERATION
SYSTEM MODE
OPTION MODE
REC FUNCTION
OUTPUT SEL
GENLOCK
RGB BLACK CONTROL
LOW SETTING
MID SETTING
CAMERA ID
SHUTTER SPEED
SHUTTER SELECT
USER SW
SW MODE
WHITE BALANCE MODE
LENS/IRIS
MATRIX
COLOR CORRECTION
SYSTEM SETTING
PAINT
VF
CAM OPE
FILE
MAINTENANCE
MAIN OPE
SKIN TONE DTL
KNEE/LEVEL
HIGH SETTING
ADDITIONAL DTL
GAMMA
CAMERA SETTING
VF VF DISPLAY
VF MARKER
VF USER BOX
VF INDICATOR1
VF INDICATOR2
MODE CHECK IND
FILE SD CARD READ/WRITE
SD CARD R/W SELECT
LENS FILE
SCENE
INITIALIZE
MAINTENANCE LENS ADJ
BLACK SHADING
WHITE SHADING
MENU
MAIN MENU
OPTION MENU
OPTION
! LED
MAIN OPERATION
BATTERY SETTING2
MIC/AUDIO 1
BATTERY/P2CARD
BATTERY SETTING1
UMID SET/INFO
MIC/AUDIO 2
TC/UB
LCD MONITOR
DIAGNOSTIC1
DIAGNOSTIC2
HOURS METER
1394 SETTING
RB GAIN CONTROL
LENS FILE CARD R/W
LENS FILE ADJ
HD SDI A B OUT MARKER
MONI OUT MARKER
VF INDICATOR3
CAC ADJ
CAC FILE CARD READ
[SELECT MODE]
Opening the Menus
USER MENU:
Displayed when the MENU button is
pressed.
MAIN MENU:
Displayed when the MENU button is
pressed for at least 3 seconds.
OPTION MENU:
Displayed when the MENU button is
pressed while pressing the LIGHT
button.
Items/
Data Saved
Adjustable
Range
Remarks
SCAN REVERSE OFF
ON
This setting is for correcting an image
which has been inverted by a film-use
lens or anamorphic lens attached to
the unit.
S C U F R
a b c
a. The following letters indicate whether the modified menu data is
saved to or read out from the memory.
The – indicates that the data cannot be saved or read.
S = Can be saved and read as scene file data.
C = Can be saved or read using SD CARD READ/WRITE.
U = Can be saved and read as user data.
Please refer to [SCENE] (page 197) and [INITIALIZE]
(page 197).
F = Can be read using READ FACTORY DATA.
Please refer to [INITIALIZE] (page 197).
R = Can set whether or not to store changes using the RC DATA
SAVE menu option.
Please refer to [Connection of the remote control unit (AJ-
RC10G)] (page 117).
b. This section shows the adjustable range of the set value, and
available options for this item.
c. About the settings available for this item.
AJ-HPX2700G-VQT1V27_eng.book 161 ページ ２００８年９月２日 火曜日 午後５時４３分