Panasonic AJ-P2C002SG - Manual (Page 175)

175 Menu: Menu Description Tables
Me
nu
Note
The items indicated by „ are the setting items for PAINT
MENU SW(„) R/W in the <SD CARD R/W SELECT>
screen. The items without „ are the setting items for PAINT
MENU LEVEL R/W.
Please refer to [SD CARD R/W SELECT] (page 195) for
more information.
HIGH SETTING
Items/
Data Saved
Adjustable
Range
Remarks
„ MASTER GAIN –3dB
:
6dB
:
30dB
Select the master gain from –3, 0, 3, 6,
9, 12, 15, 18, 21, 24, 27, or 30 dB.
S C U F –
H.DTL LEVEL 00
:
05
:
63
For performing the horizontal detail
correction level setting.
S C U F –
V.DTL LEVEL 00
:
07
:
31
For performing the vertical detail
correction level setting.
S C U F –
DTL CORING 00
:
12
:
60
For performing the noise elimination
level setting for detail.
S C U F –
H.DTL FREQ. 00
:
18
:
31
For performing the horizontal detail
frequency selection.
S C U F –
LEVEL DEPEND. 0
:
3
:
5
For setting the LEVEL DEPEND.
When the Y-detail is emphasized, details
of dark sections are compressed.
If the numerical value is larger, details of
bright sections are also compressed.
S C U F –
MASTER
GAMMA 0.30
:
0.45
:
0.75
For setting the master gamma. (0.01
step)
S C U F –
BLACK GAMMA –8
:
OFF
:
+8
For setting the gamma curve for the dark
portion.
–8 to –1:
The dark portion is compressed.
OFF: Standard state
+1 to +8:
The dark portion is extended.
S C U F –
B.GAMMA
RANGE 1
2
3 For setting the upper limit of
compression/expansion.
1:
Approximately 20%
2: Approximately 30%
3: Approximately 40%
S C U F R
„ MATRIX
TABLE
OFF
A
B For selecting the color correction table
for the linear matrix.
S C U F –
„ COLOR
CORRECT
ON
OFF For switching on/off of the 12-axis
independent color correction.
S C U F –
ADDITIONAL DTL
Items/
Data Saved
Adjustable
Range
Remarks
KNEE APE LVL OFF
1
:
5
For changing the detail level of the high
brightness portion.
S C U F R
DTL GAIN(+) –31
:
+00
:
+31
Adjust the detail level toward +
(upwards).
S C U F R
DTL GAIN(–) –31
:
+00
:
+31
Adjust the detail level toward the –
(downwards).
S C U F R
DTL CLIP 00
:
54
:
63
For setting the level for clipping the detail
signals.
S C U F R
DTL SOURCE (R+G)/2
(G+B)/2
2G+R+B /4
(3G+R)/4
R
G For setting the proportion of the RGB
signal components that provide the
detail.
S C U F R
V DTL FREQ 360TV
450TV
540TV
630TV
720TV For selecting the vertical detail
frequency.
The frequency notation is the value
converted in 720P.
S C U F R
H.DTL LINE MIX 0H
1H
2H
For setting the number of scanning lines
to be added to the video signals in order
to generate the horizontal detail signals.
S C U F R
MASTER DTL –31
:
+00
:
+31
For revising the master detail level.
S C U F R
AJ-HPX2700G-VQT1V27_eng.book 175 ページ ２００８年９月２日 火曜日 午後５時４３分