Panasonic AJ-P2C002SG - Manual (Page 182)

182 Menu: Menu Description Tables
VF INDICATOR3
Items/
Data Saved
Adjustable
Range
Remarks
P2CARD
REMAIN OFF
ONE-CARD
TOTAL Select the indication mode for the P2
card’s remaining capacity.
OFF:
Disable the remaining capacity
indication.
ONE-CARD:
Display the remaining capacity
of the P2 card currently used for
recording.
TOTAL: Display the total remaining
capacity of all P2 cards in slots.
– C U F R
BATTERY ON
OFF Set the battery voltage indication to “ON”
or “OFF”.
– C U F R
AUDIO LVL ON
OFF Set the audio lever meter indication to
“ON” or “OFF”.
– C U F R
TC ON COLOR
BAR ON
OFF Select whether the time code is to be
displayed or not on the color bar.
– C U F R
TC OFF
TCG
TCR
TCG/TCR Select the time code to display.
OFF:
Disable the time code display.
TCG: Display the time code generator
value in recording mode.
TCR: Display the time code reader
value in playback mode.
TCG/TCR:
Display the time code generator
value in recording mode, and the
time code reader value in
playback mode.
– C U F R
SYSTEM INFO OFF
ALWAYS
NORMAL Select the method of displaying system
information and warnings.
OFF:
Display no warnings other than
“TURN POWER OFF” and
“SYSTEM ERROR”.
ALWAYS:
Always display warnings.
NORMAL:
Display warnings for 3 seconds
only when problems occur.
– C U F R
COMPRESSION ON
OFF
Specify whether to enable or disable the
compression indication when the unit is
in compression mode. (Only for
DVCPRO HD in 720P)
ON:
When the COMPRESSION
MODE menu option on the
<OPTION MODE> screen is set
to “DARK”, “COMP” is indicated.
OFF: No indication is given.
– C U F R
Items/
Data Saved
Adjustable
Range
Remarks
SAVE LED SAVE
P2CARD Set the SAVE lamp function.
SAVE: The lamp lights up when the
SAVE ON/OFF switch is set to
[ON] and the output system
assigned in [OPTION MODE]
(page 166) is in the save mode.
P2CARD:
The lamp blinks in synch with the
warning message when the P2
card’s remaining recording
capacity is getting low.
– C U F R
REC STATUS ON
OFF Select whether or not to enable “REC”
indication in the viewfinder and on the
LCD monitor during recording.
ON:
REC indication enabled.
OFF: REC indication not enabled.
Note
This option is useful when unit is used
independently. When the 1394
CONTROL menu option on the <1394
SETTING> screen is set to “BOTH”, then
the setting of the REC TALLY menu
option on the <OPTION MODE> screen
is used.
– C U F R
PROXY REC ON
OFF When a video encoder card (AJ-
YAX800G, optional) is attached, proxy
recording information is displayed when
recording starts.
ON:
Display indicating whether proxy
recording is to be performed on
the P2 card only, or on both the
P2 card and the SD memory
card.
OFF: Proxy recording information is
not displayed.
– C U F R
AJ-HPX2700G-VQT1V27_eng.book 182 ページ ２００８年９月２日 火曜日 午後５時４３分