Panasonic AJ-P2C002SG - Manual (Page 30)

30 Recording and Playback: P2 Cards
Recording and Playback
Note
When using the unit for the first time, be sure to set the time
data beforehand. On how the time data is set, see [Setting
Time Data] (page 60).
1
Turn on the POWER switch.
a. POWER: [ON]
2
While pressing down the slide lock button, slide the
slide-out door to the left.
The door opens.
b. Slide lock button
c. Slide-out door
3
Insert a P2 card into the P2 card slot until the eject
button pops up.
d. Eject button
e. The card must be inserted with the logo right way up.
4
Tilt up the popped-up eject button.
f. P2 card access LED
5
The P2 card access LED indicates the status of P2 card
in the slot.
For how the P2 card status is indicated, see [P2 card
access LED and status of P2 cards] (page 31).
6
Close the slide-out door.
Note
Do not leave the slide-out door open when moving unit.
P2 Cards
Inserting P2 Cards
a
b
c
d
e
f
AJ-HPX2700G-VQT1V27_eng.book 30 ページ ２００８年９月２日 火曜日 午後５時４３分