ParaBody 883 - Manual (Page 26)

STEP 16:
FIGURE 16
PULLEY
PLATES
• Route the previously removed original LAT CABLE through the FRAME (1) and assemble one 3-1/2” PULLEY to the PULLEY
PLATES using one existing 3/8 X 1-3/4” BOLT and one exsisting 3/8” LOCK NUT. See FIGURE 16.
26
PULLEY
LAT CABLE
STEP 17:
FIGURE 17
• Securely assemble the LAT CABLE to the THREADED HOUSING (24) then assemble the THREADED HOUSING (24) to the
BOOM BRACKET using one previously removed 3/8 X 3-3/4” BOLT, two previously removed 3/8 X 1” SPACERS and one previ-
ously removed 3/8” LOCK NUT as shown in FIGURE 17.
LAT CABLE
24