Figure 7, Figure 8 – ParaBody 883 User Manual
Page 9
Advertising
FIGURE 7
STEP 7:
0
1
2
3
4
5
6
1/2
1/2
1/2
1/2
1/2
1/2
• CAREFULLY remove the BOOM PLATE from the the REAR UPRIGHT and the FRAME as shown in FIGURE 7. Discard the BOOM
PLATE.
FIGURE 8
STEP 8:
• Swing the GUIDE RODS (3) into the guide rod bushings in the LEFT BOOM BRACKET (2) as shown in FIGURE 8.
• SECURELY assemble the LEFT BOOM BRACKET (2) and the BOOM BRACKET to the REAR UPRIGHT and the FRAME using
the previously removed bolts, nylon spacers, washers and lock nuts as shown in FIGURE 8.(NOTE: The 2” NYLON SPACERS go
on the LEFT BOOM BRACKET only.)
3
2
9
BOOM PLATE
REAR UPRIGHT
FRAME
BOOM BRACKET
REAR
UPRIGHT
FRAME
2”
NYLON
SPACER
3”NYLON SPACER
2”NYLON
SPACER
Advertising