ParaBody 883 - Manual (Page 6)

STEP 2:
FIGURE 2
6
• Remove the two 3/8 X 4” BOLTS, four 3/8” WASHERS and two 3/8” LOCK NUTS from the REAR UPRIGHT as shown in
FIGURE 2.
3/8 X 4” BOLTS
STEP 3:
FIGURE 3
• SECURELY assemble the STACK BASE (1) to the BASE FRAME using two 3/8 X 4-1/4” BOLTS (16), two previously removed
3/8 X 4” BOLTS, four 3/8” WASHERS (18), four previously removed 3/8” WASHERS, two 3/8” LOCK NUTS (17) and two
previously removed 3/8” LOCK NUTS as shown in FIGURE 3.
REAR UPRIGHT
16 3/8 X 4-1/4”
3/8 X 4” BOLTS
BASE FRAME
1
18
17