Setup (initial settings), Changing the settings, 1) press the menu button – Panasonic AJ-SDd93 User Manual

Page 17

Advertising
background image

– 17 –

Setup (initial settings)

The unit’s main settings are performed while making selections using a menu-driven system.
When a TV monitor is connected to the VIDEO MON connector on the unit’s rear panel, the setup menus will appear on
the TV monitor.

Digital Video Cassette Recorder AJ-

SUPER

ON

OFF

TCG

REGEN

PRESET

EXT

INT

COUNTER

PF

PF1

PF2

PF3

DIAG

MENU

PUSH

SHTL/SLOW

TC

PRESET

METER

FULL/FINE

MONITOR SEL

RESET

REC

PB

UNITY

INPUT SELECT

VIDEO

AUDIO

CH 1

CH 2

CH 3

CH 4

HEADPHONES

SEARCH

EJECT

POWER

REC INHIBIT

CONTROL

ON

ON

OFF

OFF

LOCAL

REMOTE

REC

PLAY

FF

REW

STOP

(1) (5)

(2) (3)

Changing the settings

(1) Press the MENU button.

The setup menu screen appears on the TV monitor,
and the setup menu item number appears on the
counter display.
When the FF button is pressed for about 1.5 seconds,
the name of the setup menu item is displayed on the
counter display. When the same button is pressed
again for about 1.5 seconds, the original item No.
display is restored.
(If a setup was performed previously, the screen on
which the last change was made is displayed.)

(2) Incline the joystick upward or downward to

select the item to be set.

The cursor (

) on the menu screen moves, and the

item number on the display flashes.
• When the FF or REW button is pressed while holding

down the PLAY button, what is on the display is
replaced with the next or previous major item.

(3) Incline the joystick to the left or right at the

position where the change is to be made.

The setting is now changed.
To return what has been established as the setting to
the factory setting, press the RESET button while
holding down the SEARCH button.

(4) If there is another item to be changed, repeat

steps (2) to (3).

(5) Press the MENU button.

• If none of the settings have been changed, the menu

screen display is cleared.

• If a setting has been changed, a confirmation screen

appears.

• To activate the change in the setting, press the PLAY

button.

• To cancel the change in the setting, press the STOP

button.

• To return what has been established as the setting to

the factory setting, press the RESET button while the
menu is displayed. A confirmation screen now
appears, and if the PLAY button is pressed in this
status, the factory setting is restored.

Notes:

• If the RESET button is pressed to restore the factory

settings, only the user files currently in use are
restored. The other user files remain unaffected.

• The changes made to the SYSTEM menu contents

are recorded also by pressing the MENU button to
close the menu screen.

Advertising