Panasonic AJ-SDd93 - Manual (Page 19)

– 19 –
Setup menus (continued)
Loading user files
The contents of the USER2, USER3, USER4 or
USER5 file can be copied (loaded) into the USER1 file.
Also, the contents of the USER1 file can be copied
(saved) into the USER2, USER3, USER4 or USER5
file.
(1) Press the MENU button.
(2) Press the REW button or FF button while
holding down the PF button to select the
USER1 file.
(3) Operate the joystick, and move the cursor ( )
on the menu screen to item No.A00 (LOAD).
USER 1 USER 2
USER 3
USER 4
USER 5
Load/save Lock mode can be
set
Lock mode can be
set
Lock mode can be
set
Lock mode can be
set
Load/save
Load/save
Load/save
SETUP-MENU
<USER1>
8 0 4
A 0 0
A 0 1
A 0 2
END
BLANK LINE
LOAD
SAVE
P. ON LOAD
BLANK
USER2
USER2
OFF
NO . A 0 0 - 0 0 0 0
MENU
SETUP-MENU
<USER1>
8 0 4
A 0 0
A 0 1
A 0 2
END
BLANK LINE
LOAD
SAVE
P. ON LOAD
BLANK
USER2
USER2
OFF
NO . A 0 0 - 0 0 0 0
MENU
SETUP-MENU
U S E R 2 U S E R 1 O K ?
Y E S < P L A Y > / N O < S T O P >
LOAD
(4) Press the joystick, and incline it to the left or
right to select the user file whose
contents are to be loaded into USER1.
(5) Press the joystick.
The following message appears on the menu screen
and counter display.
Menu screen
Counter display
The number of the user file selected in step (4) is
displayed at .
(6) Press the PLAY button
The settings of the user file selected in step (4) are
loaded, and the USER1 menu display appears. If the
STOP button is pressed instead, the settings are not
changed, and the USER1 menu display appears.
(7) Press the MENU button.
A confirmation screen now appears.
When the PLAY button is pressed, the USER1 settings
are stored in the memory. If the settings are not to be
stored in the memory, press the STOP button instead.
Saving user files
(1) Press the MENU button.
(2) Press the REW button or FF button while
holding down the PF button to select the
USER1 file.
(3) Operate the joystick, and move the cursor ( )
on the menu screen to item No.A01 (SAVE).
(4) Press the joystick, and incline it to the left or
right to select the user file in which the
contents of USER1 are to be saved.
Those user files which have been set to the lock mode
do not appear on the display. If all the user files have
been set to the lock mode, the “LOCKED” display
appears, and the contents of USER1 cannot be saved
into any of the user files.
(5) Press the joystick.
The following message appears on the menu screen
and counter display.
Menu screen
SETUP-MENU
U S E R 1 U S E R 2 O K ?
Y E S < P L A Y > / N O < S T O P >
SAVE
Counter display
The number of the user file selected in step (4) is
displayed at .
(6) Press the PLAY button
The settings of USER1 are saved in the user file
selected in step (4) and stored in the memory. If the
STOP button is pressed instead, the settings are not
changed, and the USER1 menu display appears.
(7) Press the MENU button.
The regular display is restored.
Automatically recalling a user file when
turning on the power
If the user file to be loaded is selected in advance
using setup menu No. A02 (P.ON LOAD), the file will
be automatically loaded into USER1 when the power is
turned on.