Panasonic AJ-SDd93 - Manual (Page 29)

– 29 –
660
UMID REC
This selects whether or not to
record the UMID information on the
tape.
0000 OFF :
UMID information is not recorded on
the tape.
0001 ON :
UMID information is recorded on the
tape.
Note:
If 1394 has been selected as the input
signals using the INPUT SELECT
button, UMID will not be recorded even
when it is set to ON unless the input
signal can be detected.
Setup menus (continued)
624
CC REC
(For AJ-SD93P)
For selecting whether to record the
closed caption signals multiplexed
on the input signals on the tape.
0000 OFF :
No closed caption signal is recorded.
0001 ON :
When a closed caption signal is
detected from the selected input
signal, it can be recorded.
Note:
If 1394 signals have been selected as
the input signals using the INPUT
SELECT button, the closed caption
signals which have been multiplexed
onto the input signals will be recorded
on the tape regardless of the setting.
645
WIDE
SELECT
This selects whether or not to record
the wide-screen information on the tape.
0001 WIDE :
The wide-screen information is not
recorded on the tape.
0002 NORMAL :
The wide-screen information is
recorded on the tape.
Note:
If 1394 has been selected as the input
signals using the INPUT SELECT
button, the wide-screen information on
the input signals will be recorded
regardless of this menu’s setting.
YA93P
YA94G
623
SETUP 50
(For AJ-SD93P)
For setting 7.5% setup processing
to be performed on input and output
signals in the DVCPRO50 (50 Mbps)
mode.
When the STOP button is pressed,
operation is transferred to the sub-
screen, and the setup level is set for
each output. To return from the sub-
screen, press the STOP button again.
No./Item Description
00
CMPST IN
This selects the 7.5% setup processing
for the input composite signal.
0000 THRU :
The signal is recorded in its original
form.
0001 CUT :
The signal is recorded with the
7.5% setup removed.
01
CMPST OUT
This selects the 7.5% setup processing
for the output composite signal.
0000 THRU :
The signal is output in its original
form.
0001 ADD :
The signal is output with the 7.5%
setup added.
Note:
Bear in mind the setting for sub-screen
item No. 03 (CMPNT OUT) of setup
menu item No. 623 (SETUP 50).
02
CMPNT IN
This selects the 7.5% setup processing
for the input component signal.
0000 THRU :
The signal is recorded in its original
form.
0001 CUT :
The signal is recorded with the
7.5% setup removed.
03
CMPNT OUT
This selects the 7.5% setup processing
for the output composite, component
and serial (digital) signal.
0000 THRU :
The signal is output in its original
form.
0001 CUT :
The signal is output with the 7.5%
setup removed.
0002 ADD :
The signal is output with the 7.5%
setup added.
Sub-screen
No./Item Description
USER menu <VIDEO>
The underlined items indicates the initial setting.
YA94G
This appears only when the optional board
AJ-YA93P has been installed.
This appears only when the optional board
AJ-YA94G has been installed. YA93P
YA93P
YA93P
YA94G
YA93P
YA94G