Panasonic KX-HGW200 - Manual (Page 6)

Overview
6
Features
The main features of the KX-HGW200 are described as follows:
Networking
For Home Network
The KX-HGW200 has three types of network interface: HomePNA 2.0,
10 Base-T Ethernet and wireless.
It supports AppleTalk
® network system (EtherTalk ® interface network),
TCP/IP and IPX TM (Novell ® ) protocols simultaneously.
≥ HomePNA 2.0 connection (using existing telephone lines):
Communication speed is a max.10 Mbps.
The HomePNA can transmit and receive data at rates up to 10 Mbps over
any standard home telephone wiring. It links two or more computers by
using your existing phone wiring. While the HomePNA passes information
over your home’s phone wiring, you can use your telephone without
disrupting regular phone service. You will need one HomePNA card and
one modular phone line with standard RJ-11 male phone plugs attached
at each end for each computer that you want to connect to the home
network.
≥ 10 Base-T Ethernet connection (using category 5 straight cable):
Communication speed is a max.10 Mbps.
In order to network more than one computer using Ethernet, an optional
Ethernet hub is required.
≥ Wireless connection (using optional Panasonic wireless cards
KX-HGC200):
Communication speed is a max.11 Mbps.
PQQX12817ZA \1-P29 01.3.8 3:17 PM y [ W 6