Precor Low Impact M9.55 User Manual
Page 10
page 10
Diagram 2
Hardware Kit.
A
G
C
D
F
B
Carefully unpack the pieces of the treadmill and lay them on the floor near the
location where you plan to use the treadmill.
Hardware Kit
After unpacking the treadmill, open the hardware kit (refer to Diagram 2) and make
sure that you have the following items:
(A) twenty — 1” long buttonhead screws
(B) fourteen — flat washers
(C) four — 3/4” long flat head screws
(D) four — flat washers
(E) 1/4” hex key — belt adjustment
(F) 3/16” hex key — mount uprights, display and handrails to base frame
(G) 5/32” hex key — install handrails to display and hood to base
If any items are missing, contact Customer Support at 1-800-347-4404.
Note: After assembling the treadmill, be sure to store the hex keys in a secure place. The
tools are used for specific maintenance procedures that are described in this manual.
Acquiring the Appropriate Tools
Obtain the following tools
before assembling the treadmill.
Wire cutter
Bubble level
Medium weight string [about 1 foot (30 cm)]
Strong adhesive tape
SAE Standard socket set with a ratchet or 8” Crescent wrench
E