Precor Low Impact M9.55 User Manual
Page 34
page 34
Viewing the Odometer, Hours of Use, Software Version and Error Log
Start at the Precor banner and press the Stop button. Then, within ½ second, initiate
the following key sequence.
Speed
▲
, Speed
▼
Note: You can use the number keys (6, 5) instead of Speed
▲
, Speed
▼
if you
prefer.
The field name Odometer appears briefly and then the odometer value (the cumula-
tive distance users have travelled) appears in miles or kilometers.
Press Enter and the number of hours (Hour Meter) that the unit has been in use
appears. The treadmill notes the passing of each minute, but the numeric value that
appears is truncated to the nearest full hour.
Press Enter again and the unit’s three digit Software Version (upper and lower)
appears on the display.
Press Enter once again and the Error Log appears. Press any
▼
or
▲
key to view
the error messages. To return to the Precor banner, press Enter, Stop, or Reset.
Note: To clear (delete) the error log, press Quick Start for at least 4 seconds while
viewing the list. Prompts appear on the display and let you know when the error
messages have been deleted (“cleared” from memory).
Important: You cannot retrieve the error log once you have deleted it.