Philips DTR 2530/05 - Manual (Page 20)

21 Use more of your Digital Terrestrial Receiver
ENGLISH
Press the OK key to start the automatic
scan mode.
Using or , choose whether:
The channels found are to be added to the •
old list (standard setting),
The old channel list is to be overwritten,
•
The new found channels are to be •
discarded.
Press the OK key.
Manual Search
This type of scan mode enables the specifi c
search for an individual channel. This is
particularly interesting if you only want to
include one individual channel into your channel
list and you know the accurate information on
the channel and frequency.
Highlight Manual Search and then press
OK.
Extended installation 5.5
Press the MENU key.
Highlight the second menu item Search for
Channels using the arrow key or and
then press OK.
After the fi rst installation (refer to chapter
Install), it may be required to search for
channels again or to add specifi c channels that
are additionally broadcast.
Note
In order to carry out an extended installation,
you have to reset the device to its default
settings. Refer to chapter Restoring Factory
Settings.
Two options are available.
Automatic Search
This scan mode is usually the appropriate
one, because normally all channels are found
automatically.
Highlight Automatic Search and then
press OK.