Philips DTR 2530/05 - Manual (Page 24)

25 Use more of your Digital Terrestrial Receiver
ENGLISH
In order to view the TV programme again,
press the RADIO key again.
Security 5.10
Press the MENU key.
Highlight the sixth menu item Security
using the arrow key or and then press
OK.
Enter the PIN code.
Notes
The PIN code is set to 0000 at the •
factory. Take into account the displayed
information. It will help you to select the
correct settings.
Selecting and altering the settings is carried
•
out by means of the arrow keys.
A displayed window can be closed by
•
pressing the EXIT key.
Carrying out software update
Note
For this purpose, your Digital Terrestrial
Receiver has to be set to standby mode.
Every night between 1 am and 5 am, your Digital
Terrestrial Receiver checks whether a software
update is available. If a new software is available,
you will receive a message, at the next switch on
of your Digital Terrestrial Receiver to accept the
update. Then the software update starts.
You can also start the search process manually.
Press the MENU key.
Highlight Technical Information using the
arrow key or and then press OK.
Highlight System Information using the
arrow key or and then press OK.
Press OK to start the software update.
Use the arrow key or to select Yes.
Press OK to start the update.
Radio 5.9
Note
Digital radio programmes are not broadcast in
all countries. In this case, a message indicating
that the radio list is empty appears.
If a digital radio programme is broadcast
in your country, press the RADIO key to
receive it.