Philips DTR 2530/05 - Manual (Page 26)

27 Accessories and connections
ENGLISH
Audio connection 7.2
Analogue connection
Connect the L/R audio outputs of the Digital
Terrestrial Receiver to the relevant input of your
audio equipment using a double CINCH cable
(not supplied).
Consult the user manual of your audio
equipment to choose the proper analogue audio
inputs.
Digital connection
Connect the SPDIF output of the Digital
Terrestrial Receiver to the relevant input of your
audio equipment using a single CINCH cable
(not supplied).
Consult the user manual of your audio
equipment to choose the proper digital audio
input.
Accessories and 7
connections
Recorder connection 7.1
Connect the supplied scart cable to the
VCR scart socket at the rear of the Digital
Terrestrial Receiver and to the scart input
EXT1 of the recorder.
Connect the aerial cable from the wall
socket to the RF IN socket at the rear of
the Digital Terrestrial Receiver.
Connect the RF OUT socket at the rear of
the Digital Terrestrial Receiver to the ANT
IN socket at the rear of the recorder using a
coaxial cable.
Connect the ANT OUT socket at the rear
of your recorder to the RF input of your TV
set using a coaxial cable.
Connect a scart cable to the scart input of
the TV set and to the TV scart socket at the
rear of the Digital Terrestrial Receiver.
Plug your Digital Terrestrial Receiver to the
mains using the supplied power adaptor.
Warning
To be able to record digital television, you must
make sure the Digital Terrestrial Receiver is on.