Philips DTR 2530/05 - Manual (Page 21)

Use more of your Digital Terrestrial Receiver 22
Notes
Not all channels offer an extensive • EPG.
Many broadcasting services broadcast the •
current day programme but do not offer
detailed descriptions.
There are broadcasting services that do
•
not offer any EPG information.
Due to the progressive technical
•
development, more and more broadcasting
services will extend this offer in the future.
Select the desired channel.
Press the EPG key to call up the electronic
programme guide.
Close the EPG by pressing the EXIT key.
EPG offers the following functions:
If you require more information on a •
programme, highlight it using the arrow key
or and then press INFO.
You can select programmes earlier or later •
in the day using the arrow key or .
Change to the programme of another
•
day using the green (next day) or the red
button (previous day).
If you want to adopt a programme into the
•
timer list, highlight it and press the TIMER
key. Confi rm the request by selecting Yes
and pressing the OK key.
Note
Detailed information on the Timer can be
found in the next paragraph.
Successively select the adjustable values
using the arrow key or .
The desired • Frequency is set with the
arrow key or .
The frequency in
• MHz is entered via the
numerical keys of the remote control.
Choose whether All channels or channels
that are Free to air only are to be searched
for.
Then highlight OK and press the OK key to
start the manual scan mode.
If some channels were found, the same •
message as the one in the automatic scan
mode will be displayed. Refer to previous
paragraph.
If no channel was found, a message will be
•
displayed.
Press the OK key.
EPG 5.6
The electronic programme guide (EPG) offers
you an overview of all programmes to be
broadcast in the coming week on the current
channel.