Panasonic FP (Sigma) - Manual (Page 17)

FPΣ (Sigma)
Specification tables
17
Timer/Counter (T/C)
Comment storage
Other functions
P P E E R R F F O O R R M M A A N N C C E E S S P P E E C C II F F II C C A AT T II O O N N S S
Item Description
Type of control unit NPN transistor output type PNP transistor output type Relay output type
Part number FPG-C32T2H/FPG-C32T2HTM FPG-C28P2H/FPG-C28P2HTM FPG-C24R2H/FPG-C24R2HTM
Number of I/O points
No expansion 32 (Input: 16 / Output: 16) 28 (Input: 16 / Output:12) 24 (Input: 16 / Output: 8)
with expansion Max. 384 Max. 380 Max. 376
Program memory Built-in Flash ROM
Program capacity 32.000 steps
Operation speed 0.32 µs- /step, Basic instructions
Memory for execution
External input (X) 1184 points
External output (Y) 1184 points
Internal relay (R) 4096 points (R0 to R255F)
1024 points 1 , 2 / At reset: timer 1008 points (T0-T1007), counter 16 points
( C1008-C1023), Timer range is selected by instructions from 1ms, 10ms, 100ms,
1s / Counter: 1 to 32767 counts
Link relay (L) 2048 points 1
Data register (DT) 32765 words (DT0-DT32764) 1
Link data register (LD) 256 words 1
Index register (I) 14 words (I0-ID)
Differential points Unlimited number of points
Master control relay points 256 points
Labels (JP+LOOP) 256 labels
Number of step ladder 1000 stages
Number of subroutine 100 subroutines
High-speed counter Single-phase: 1ch: 50kHz/2ch: 30kHz/3 or 4ch: 20 kHz / Two-phase: 1ch: 20kHz/2ch: 15kHz
Pulse output 1 channel: 100kHz / 2 channel: 60kHz
PWM output 2 channels, 1.5 to 12.5 kHz (at resolution of 1000) / 15.6 to 41.7 kHz (at resolution of 100)
Pulse catch input 8 points (X0-X7)
Interrupt program 9 programs (external 8 points, 1 periodical interrupt point 0.5ms - 30s)
Self-diagnosis functions Watchdog timer, program syntax checking, etc.
Clock/Calendar function Year, month, day, hour, minute, second, and day of week 6
Volume input 2 points resolving power 10bits (K0-K1000)
Thermistor input 2 points, resolution: 10 bits (0 to 1000) (for C32T2HTM, C24R2HTM, and C28P2HTM only)
Link functions Computer link (1:1, 1:N) 3 , 4 General communication (1:1, 1:N) 3 , 4 PLC link 5
Battery life (Battery is optional) 220 days or more* (actual usage value: approx. 840 days (25°C). Suggested replacement interval: 1 year
All kinds of comments, including I/O comments, remarks and block comments, can be stored (without backup battery)
Linear/circular i nterpolution for positioning Available Available Not available
Program edition during run, constant scan, forced I/O, password,
floating point real number operation, PID processing instruction
Comment memory 128Kbyte
Notes: 1) If a battery is not used, only fixed area is backed up (Counter: C1008-C1023, internal relay: R900-R97F, Data register: DT32710-
DT32764). If a battery is used, backup is possible: Area-setting of hold or no-hold is possible by system register.
2) Points can be increased using auxiliary timer.
3) Optional communication cassette (RS232C type) is necessary for 1:1 communication.
4) Optional communication cassette (RS485 type) is necessary for 1:N communication.
5) Optional communication cassette (RS485 type) is necessary.
6) Optional battery is necessary in order to use Clock/Calendar function. Precision calendar timer: at 25°C = 77°F less than 51-second
error per month / at 0°C = 32°F less than 119-second error per month / at 55°C = 131°F less than 148-second error per month.
*Value applies when no power is supplied at all.
20060227_FP_Sigma.qxd 15.02.2006 14:55 Uhr Seite 17
02/2006