Loading data, Load, Part vi disk drive (kn2400) – Panasonic SX-KN2600 User Manual

Page 120

Advertising
background image

Part VI

Disk Drive (KN2400)

120

QQTG0692

D

isk D

riv

e (

K

N

2

400

)

Loading data

Recall (load) the data from the disk to this instrument’s memories.
• Note that the load procedure causes any data which is currently stored in the relevant memories to be

erased.

LOAD

Load data that saved to a disk into this instru-
ment’s memory.

1.

Insert the disk with the stored data into the
Disk Drive. Push it all the way in until you hear
a click.

2.

On the DISK MENU display, select LOAD.

• The display looks similar to the following.

• If there are only SMF files on the disk, the dis-

play automatically changes to the SMF LOAD
display.

3.

Use the buttons below the display to select the
song (Technics file) you wish to load.

• If there are SMF files on the disk and you wish

to load an SMF file, press the SMF button.
(Refer to next page.)

4.

Press the LOAD button.

• The LOAD operation begins.
• When the operation has been successfully

completed, “COMPLETED!” is shown on the
display.

• If song data was loaded, you can press the

START/STOP button to begin playback when
the SEQUENCER PLAY display is active.

• You can load the type of data for which only

one song can be recorded in the
SEQUENCER. (This type is available for disks
used with older Technics models.) Note, how-
ever, that in this case, the song is loaded into
SONG 1, but the data in SONG memories 2 to
10 are erased.

• You can also access the LOAD display by

pressing the DISK button for a few seconds.

ⅢⅢⅢⅢ

LOAD OPTION

Specify the kind of data you wish to load from the
disk to your instrument.

1.

Use the PAGE buttons to access the PAGE
2/3 LOAD OPTION display.

• The display looks similar to the following.

2.

Use the buttons below the display to specify
the types of data you wish to load (YES/NO).

• - - - - - indicates that this type of data has not

been saved.

• This setting is canceled when you quit the

LOAD display or when another file is selected.

3.

Press the LOAD button.

• The LOAD operation begins.

11_Part VI.fm 120 ページ 2003年2月5日 水曜日 午後2時43分

Advertising
This manual is related to the following products: