Panasonic SX-KN2600 - Manual (Page 185)

Part XIII MIDI
185
QQTG0692
MI
DI
ⅢⅢⅢⅢ
Storing user settings
After you change the MIDI settings, you can
store your customized settings in USER.
1. Adjust the various MIDI settings.
2. Go to PAGE 4/4 of the MIDI PRESETS dis-
play.
• The display looks similar to the following.
3. Use the WITH SPLIT POINT? button to spec-
ify whether or not to also store the keyboard
split point (YES/NO).
4. Press the WRITE button.
ⅢⅢⅢⅢ
Recalling the USER settings
1. Go to PAGE 3/4 of the MIDI PRESETS dis-
play.
2. Press the OK button.
Computer Connection
These settings are used to select the mode related to MIDI signal flow when a personal computer is con-
nected to the USB terminal of this instrument.
• When connecting to a personal computer, install the USB driver on the included CD-ROM to the com-
puter first. (Refer to the separate manual for more information.)
1. Turn off the power to this instrument.
2. Connect a personal computer to the USB ter-
minal on the rear of this instrument.
3. Turn on the power to this instrument.
4. On the MIDI MENU display, select COM-
PUTER CONNECTION.
• The display looks similar to the following.
5. Use the
∧
and
∨
buttons to select a mode.
NORMAL:
Ordinary mode
PC as master:
The mode which is appropriate for data trans-
mission
KN as master:
The mode when this instrument is used as the
master keyboard.
KN as slave:
The mode when this instrument is used as a
slave instrument.
INTERFACE:
The mode when this instrument is used as a
connecting device between a PC with only
USB terminals and an instrument with only
MIDI terminals.
18_Part XIII.fm 185 ページ ２００３年２月５日 水曜日 午後２時０分